Brain | iKon | Xbar | TracX - Google Play
You'll be able to see results in few seconds.
Publisher Description
Configuration Application for flight control units Brain / iKon / Xbar / TracX
App for Android tablets and phones. It allows to set parameters and settings on Brain/Ikon/Xbar/Tracx flybarless controllers via Bluetooth.
The application can be used by connecting a Bluetooth dongle to the SYS port of all MSH flight control units.
This App needs latest firmware release on the unit to be used to its full potential. If your devices has internet access, the app will prompt you in case a new firmware for the flybarless unit is available.
MSH products can be purchased in any of the official MSH dealer shop.
About Brain | iKon | Xbar | TracX
The company that develops Brain | iKon | Xbar | TracX is MSH Electronics S.r.l.. The latest version released by its developer is 1.0 .
To install Brain | iKon | Xbar | TracX on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2025-08-06 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Brain | iKon | Xbar | TracX as malware as malware if the download link to com.msheli2 is broken.
How to install Brain | iKon | Xbar | TracX on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the Brain | iKon | Xbar | TracX is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by Brain | iKon | Xbar | TracX will be shown. Click on Accept to continue the process.
- Brain | iKon | Xbar | TracX will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version
posted on 2025-08-06
• For the cyclic and tail servos, we increased the maximum refresh rate to 1150Hz. In this way, the optimal operating parameters for Futaba's new UR servos (center pulse 200us 1150Hz) and/or Theta servos (center pulse 300us 1000Hz) can be configured in ADVANCED, section 4 ‘Servos’
• Now by activating (or deactivating) the H-4X 4-servo swashplate, it is no longer necessary to reboot the flight controllers to activate the correct servo ... [MORE]
version
posted on 2025-08-06
• For the cyclic and tail servos, we increased the maximum refresh rate to 1150Hz. In this way, the optimal operating parameters for Futaba's new UR servos (center pulse 200us 1150Hz) and/or Theta servos (center pulse 300us 1000Hz) can be configured in ADVANCED, section 4 ‘Servos’
• Now by activating (or deactivating) the H-4X 4-servo swashplate, it is no longer necessary to reboot the flight controllers to activate the correct servo ... [MORE]
version
posted on 2023-12-15
• Added to the Micro Brain2 FCU the management of the B-Aux3 channel on the CH4 connector to be able to control buzzer activation, retractable landing gear, lights, winch, smoke, etc. etc. via PWM signal
• Added handling of the new SKY telemetry parameter introduced by Spektrum with the November 21 AirWare update
[MORE...]
version
posted on 2023-10-20
• Added the telemetry decodify of OMP ESC
• Implemented Forward Programming Integration for those who have Spektrum telemetry receivers on their models but have switched to using transmitters with OpenTX / EdgeTX operating systems and Multi Module Radio frequency. An LUA app will be released later
• Corrected the calculation of vibration frequencies with some production batches
[MORE...]
version
posted on 2023-09-06
• Crossfire channel reception up to 16CH (with ELRS and Packet Rate 333Hz Full)
• New Brain2Crossfire.zip version of Crossfire Integration package (Release Notes inside) that now other than TBS work also with ELRS External Module. Note: this version of the LUA app work only starting from this new firmware and for both TBS and ELRS external modules
[MORE]
version
posted on 2023-07-05
• Crossfire reception improvements (sensor loss occurrence zeroed)
• Completely new Brain2TBScrossfire.zip version of the TBS Crossfire Integration package (Release Notes inside). Work only starting from this new firmware (does not work with ELRS because ELRS Telemetry is for now only unidirectional, unlike TBS telemetry, which is bidirectional)
• Added for TBS Crossfire & ELRS Crossfire protocol the telemetry transmission of a Variometer data (Altitude & Vertical Speed)
[MORE....]
version
posted on 2023-05-16
• Improvements, changes, and corrections to previous version 3.4.103 as per user suggestions and reports (ESC telemetry with F.Bus protocol, ESC telemetry with SUMD protocol, etc.)
• Improved serial communication of SYS port (using Remote USB or Bluetooth dongle) when simultaneously using Integrations which in this case are faster
• Added in the “Servo Setup (Output)” panel of the Wizard a new icon for Cyclic servo’s 760us/560Hz
[MORE....]
version
posted on 2023-03-10
• Improvements, changes, and corrections to previous version 3.4.100 as per user suggestions and reports
• Added the management of new Brain2/iKon2 batch
• Revised the routine of “Tail Motor RPM2” parameter to be able to record higher speed
• Added the checkbox for VARIO telemetry also in ADVANCED
• In Spektrum Integration added the checkbox for VARIO telemetry and the loggable parameters “Rel.Altitude” & “VSpeed”
[MORE...]
version
posted on 2022-03-18
. Added to the 11 Jeti telemetry transmitted values selected in the “Parameter Setup” tab of DIAGNOSTIC, also the “Log Parameter 12” value “Global Vibrations”. If an ESC is selected in “Telemetry Input” of panel 12 of the Wizard, are also transmitted “ESC Battery Voltage”, “ESC Battery Current”, “ESC Battery Used”, “ESC Battery Ripple”, “ESC Power Output”, “ESC LS RPM”, “ESC Temperature 1 (°C & °F)” values. If Hobbywing or Jive Pro or YGE are selected also “ESC Temperature 2 (°C & °F)”[MORE]
version
posted on 2021-08-04
. Now also the SRXL2 signal coming from the “Bind/Prog/SRXL2” port of Spektrum “base” receivers (EG: AR6610T, AR8020T) is recognized and used
. Improved the channel reception immunity when app’s are connected to the Flight Control Units and F.Port2 and F.Port (inverted and un-inverted) protocols are used
[MORE...]
Disclaimer
Official Google Play Link
We do not host Brain | iKon | Xbar | TracX on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Brain | iKon | Xbar | TracX is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
